PRODUCT DATA
Due to continuing product development, specifications are subject to change without notice
EV130_200_300Man_Mar13.docx
134777_012
Revised 03/2013
2013 RenewAire LLC
Page 6
EV130/EV200/EV300
E n e r g y
E x c h a n g e
S y s t e m :
Cross flow fixed-plate enthalpic energy exchange core: engineered, proprietary resin-media
composite. Provides both sensible and latent heat transfer.
C e r t i f i e d
P e r f o r m a n c e :
See HVI Certified Ratings
A c c e s s D o o r :
Front panel opens to provide access to filters, blowers, and heat exchanger. Snap latches and hinges
provided for easy service.
I n s u l a t i o n :
One inch foil-faced fiberglass throughout.
M o u n t i n g
O p t i o n s :
Unit may be mounted to wall or floor joists using integral mounting flange with hanging bracket kit
provided.
B l o w e r / M o t o r :
A single high efficiency PSC motor directly drives two large diameter centrifugal blowers for quiet
operation.
F i l t e r s
Cleanable polyester air filters for both exhaust and fresh air streams.
D e f r o s t :
Passive frost-free design under most residential conditions. Optional defrost accessory available for
severe applications and climate zones.
W a r r a n t y :
Ten year limited warranty on energy exchange core; two year limited warranty against defects in
material and workmanship on all other components.
EV130
EV200
EV300
A i r f l o w
R a n g e :
50-140 CFM for each air
stream.
100-200 CFM each air stream.
150-300 CFM each air stream.
R a t e d A i r f l o w :
130 CFM for each air
stream at 0.2” external
static pressure (ESP).
200 CFM for each air stream
at 0.2” external static pressure
(ESP).
300 CFM for each air stream at
0.4” external static pressure
(ESP).
D i m e n s i o n :
28 3/4” wide x 20 1/8”
high x 13” deep (not
including duct collars).
28 3/4” wide x 20 1/8” high x
24” deep (Not including duct
collars).
28 3/4” wide x 20 1/8” high x
24” deep (Not including duct
collars).
U n i t W e i g h t :
58 lbs.
80 lbs.
88 lbs.
D u c t
C o n n e c t i o n s :
Insulating double collars
with six-inch/eight-inch
round connections for
flexible or rigid duct work.
Insulating double collars with
six-inch/eight-inch round
connections for flexible or
rigid duct work.
Insulating double collars with 8-
inch oval connections for flexible
or rigid duct work.
E l e c t r i c a l :
Power: 0.1 HP, 120 Volt,
60 Cycle, single phase, 1.2
FLA, 102 watts at 130
CFM. Control: On-board
24 volt transformer and
relay.
Power: 0.1 HP, 120 Volt, 60
Cycle, single phase, 1.5 FLA,
157 watts at 181 CFM.
Control: On-board 24 volt
transformer and relay.
Power: 0.2 HP, 120 Volt, 60
Cycle, single phase, 3.3 amps,
315 watts at 297 CFM. Control:
On-board 24 volt transformer
and relay.
