Reference Boards of RZ/G2H, RZ/G2M, RZ/G2N, and RZ/G2E
Start-up Guide
R01US0555EJ0100 Rev.1.00
Page 6 of 13
Mar. 31, 2022
The image will be sent to the board via serial connection.
After successfully download the binary, Flash Writer starts automatically and show a message like below on the
terminal.
Flash writer for RZ/G2M V1.00 Sep.24,2019
>
1.3
Writing Bootloader
“xls2” command of Flash Writer is used to write binary files. This command receives binary data from the serial port
and write the data to specified address of the Flash ROM with information where the data should be loaded on the
address of the main memory.
This is an example of writing “bootparam_sa0.srec” which should be placed to E6320000h of the main memory to
000000h of the Flash ROM.
>
xls2
===== Qspi writing of RZ/G2 Board Command =============
Load Program to Spiflash
Writes to any of SPI address.
Winbond : W25M512JW
Program Top Address & Qspi Save Address
===== Please Input Program Top Address ============
Please Input : H'
E6320000
===== Please Input Qspi Save Address ===
