Renesas RX700 Series, Manual, Page: 24 / 66

Renesas Starter Kit+ for RX72N 4. Smart Configurator Using the e
2
studio
R20UT4442EG0100 Rev. 1.00 Page 24 of 66
Nov.29.19
4.5.4 Ports
Referring to the RSK+ schematic, LED0 is connected to P71, LED1 is connected to PH6, LED2 is connected
to PL7 and LED3 is connected to PL6. PH3 is used as one of the LCD control lines, together with P02, PK7
and PL0.
Click the ‘Add component’
icon. In ‘Software Component Selection’ dialog -> Type, select
‘
Drivers
’
.
Select ‘Ports’ as shown in Figure 4-21 then click ‘Next’.
Figure 4-21 Select Ports
In ‘Add new configuration for selected component’ dialog -> Resource, select ‘PORT’ as shown in Figure 4-22
below then click ‘Finish’.
Figure 4-22 Select Resource – PORT