Renesas RX23T Series, User Manual

Page: 11 / 41

RSKRX23T
R20UT3318EG0100
Rev. 1.00
RENESAS STARTER KIT
Aug 24, 2015
R20UT3318EG0100
Rev.
1.00
Page 10 of 40
Aug 24, 2015
1. Overview
1.1 Purpose
This RSK is an evaluation tool for Renesas microcontrollers. This manual describes the technical details of the
RSK hardware. The Quick Start Guide and Tutorial Manual provide details of the software installation and
debugging environment.
1.2 Features
This RSK provides an evaluation of the following features:
•
Renesas microcontroller programming
•
User code debugging
•
User circuitry such as switches, LEDs and a potentiometer
•
Sample application
•
Sample peripheral device initialisation code
The RSK board contains all the circuitry required for microcontroller operation.
1.3 Board specification
Board specification was shown in
Table 1-1 below.
Item Specification
Microcontroller
Part No : R5F523T5ADFM
Package : 64-pin LFQFP
On-Chip Memory : ROM 128KB, RAM 12KB
On-Board Memory
I2C EEPROM : 2Kbit
Input Clock
RX23T Main : 20MHz
RL78/G1C Main: 12MHz
Power Supply*
1
DC Power Jack : 5 V Input
Power Supply IC : 5V Input, 3.3V Output
Debug Interface
E1 14-pin box header
Push Switch
Reset Switch x 1
User Switch x 3
Potentiometer (for ADC)
Single-
turn, 10kΩ
LED
Power indicator: green x 1
User : green x 1, orange x 1, red x 2
USB to Serial Converter Interface
Connector : USB-MiniB
Driver : RL78/G1C Microcontroller (Part No R5F10JBCANA)
Pmod™
PMOD1 : Angle type, 12-pin Connector
PMOD2*
2
: Straight type, 12-pin Connector
Application Board Interface *
2
2.54mm pitch, 26-pin x 2 (JA1, JA2), 24-pin x 2 (JA5, JA6)
Table 1-1: Board Specification
*1
: Board can also supply 5V into RX23T microcontroller without LDO regulator.
*2
: The Application Board Interface connectors are not fitted on this product.