Emulation Adapter
System Configuration and Setup
R20UT5180EJ0110 Rev. 1.10
Page 23 of 63
Sep.12.22
3. System Configuration and Setup
The system configurations of this emulation adapter are as follows according to your intentions in using
it.
•
A simple evaluation board (See section 3.1.)
•
An emulation board (See section 3.2.)
3.1
System Configuration as a Simple Evaluation Board
Figure 3-1 shows a system configuration when the emulation adapter is connected to the base board
for use as a simple evaluation board. Connection of an emulator is not essential.
Using the pin headers on the base board enables the control and monitoring of each pin of the target
device.
Figure 3-1 System Configuration (Simple Evaluation Board)
