R8C/3MK Group
USB-to-Serial Communication Conversion Demo Board
R0K5R8C3MDU30BR Instruction Manual
R01AN1051EJ0100 Rev.1.00
Page 6 of 38
Mar 21, 2012
3.2 Warning
WARNING
Warnings for Power Supply:
This product CAN NOT use external power supply from header pins. The demo board may incur
damage.
Do not touch the plug of the power cable when your hands are wet. This may cause electric
shock.
Power and Ground terminals are also on the rear surface of this product. They should Not be in
contact with a conductive material directly.
When installing this equipment, insure that a reliable ground connection is maintained.
If you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then
disconnect power immediately
Do not use this as it is because of the danger of electric shock
and/or fire. In this case, contact your local distributor.
Before setting up this product and connecting it to other devices, turn off power or remove a
power cable to prevent injury or product damage.
Warnings to Be Taken for Handling:
Do not break down this product. Breaking down the product will void your warranty.
Warning for Installation:
Do not set this product in water or areas of high humidity. Make sure that the product does not
get wet. Spilling water or some other liquid into the product may cause un-repairable damage.
Warning for Use temperature:
This equipment is to be used in an environment with a maximum ambient temperature of 35°C.
Care should be taken that this temperature is not exceeded.
