R0E510YLVB00 User's
Manual
R20UT2451EJ0100 Rev.1.00
Page 3 of 7
Dec 20, 2012
5. Connecting Low voltage OCD board with user system
For connecting Low voltage OCD board with user system, need to mount a connector on user system.
Refer to this chapter and user manual of devices, when you design your system.
5.1 The connector for connecting user system and mounting connector
Figure 4 The connector for mounting user system and mounting connector
5.2 Pin assignments of the connector on the user system
Table 2 Pin assignments of the connector
Pin No.
Pin Name
Input/Output*
Remarks
1 P40 -
P40 is connected with target
power supply through 100k ohm.
2
P125/RESET
Output -
3
P137
Output -
4
VSS
- -
5
VDD
- -
6
P00
Input / Output
-
7
P01
Input / Output
-
8
P02
Input / Output
-
9
P03
Input / Output
-
10
P04
Input / Output
-
Note* As seen from this product (R0E510Y16LVB00
30mm
30mm
10mm
20mm
8510-4500
(Connector for mounting the user system)
7610-5002
(Connector on the this product)
R0E510YLVB00
Top View
Target board (User system)
5mm
5mm
5mm
:Area with limit on mounted
components
5mm
