User’s Manual U17029EJ3V0UM
5
INTRODUCTION
Readers
This manual is intended for engineers who will use the QB-78K0MINI for debugging.
Engineers who read this manual are assumed to be familiar with device functions and
uses and to have knowledge about debugging.
Purpose
This manual is intended to give users an understanding of the basic specifications of the
QB-78K0MINI.
Organization
This manual mainly consists of the following sections.
z
General
z
Names of parts
z
Hardware settings and functions
z
Cautions on use of self-check board
z
Restrictions
How to Read This Manual
It is assumed that the reader of this manual has general knowledge in the fields of
electrical engineering, logic circuits, and microcontrollers. This manual describes basic
setup steps and switch settings.
To learn more about the basic specifications and use methods:
→
Read this manual in the order of the
CONTENTS
.
To learn more about the QB-78K0MINI’s manipulation methods, command functions, and
other software-based settings:
→
Refer to the user’s manual of the debugger (supplied with the QB-78K0MINI) to be
used.
The
mark
shows major revised points.
Conventions
Note
:
Footnote for item marked with Note in the text
Caution
:
Information requiring particular attention
Remark
: Supplementary
information
Numeral representation: Binary … xxxx or xxxxB
Decimal … xxxx
Hexadecimal
…
xxxxH
Prefix indicating power of 2 (address space, memory capacity)
K (kilo): 2
10
= 1,024
M (mega): 2
20
= 1,024
2
