•
Place a breakpoint at the call to
main();
Breakpoints can only be set when the E8a is connected to the target and the module is downloaded. Breakpoints can be
set by double-clicking in the grey column containing the PC arrow next to the line to break at; or selecting the line and
pressing F9; or right click on the line and select ‘Toggle breakpoint’. Alternatively set an eventpoint, by double-clicking in
the column to the left of the breakpoint column. Up to 2 eventpoints can be set. Eventpoints do not require programming the
flash memory and so are faster to use.
•
Press ‘Reset Go’ on the debug toolbar.
The code will execute to the breakpoint. At this point all the device initialisation will have been completed.
•
Press ‘Step In’ on the debug toolbar.
The code window will open ‘main.c’ and show the new position of the program counter.
•
Insert a breakpoint on the call to the
TimerADC
function.
10
