(3/4)
5. Connection Procedure
(See Figure 3)
The procedure for connecting the M3T-FLX-100NSD is shown
below.
(1) Mount the NQPACK100SD-ND on the user system.
(2) Attach the YQPACK100SD on the NQPACK100SD-ND.
(3) Secure the four corners of the YQPACK100SD with the
YQ-GUIDE's.
●
Do not use the screws included with the
YQPACK100SD for fixing the YQPACK100SD.
●
Do NOT used the screwdriver included with the
NQPACK100SD-ND that is used only for the
HQPACK100SD.
(4) Attach the M3T-FLX-100NSD on the YQPACK100SD.
(5) Attach the probe of the emulation pod to the M3T-FLX-
100NSD.
M3T-FLX-100NSD
YQ-GUIDE (x4)
YQPACK100SD
NQPACK100SD-ND
100-pin 0.5-mm-pitch
(100P6Q-A) foot pattern
(1)
(2)
(3)
(5)
Use a slotted screwdriver.
FLX100
(4)
: No. 1 pin
Be sure to align the pins.
Figure 3 Connection procedure of the M3T-FLX-100NSD
6. External Dimensions and a Sample Foot Pattern
27.0
28.6
27
.0
12
.1
16
.5
0.25
0.5
13.0
17.0
13
.0
17
.0
Unit: mm
M3T-FLX-100NSD
J2
J1
1
1
50
50
25
25
26
26
REV.A JAPAN
Figure 4 External dimensions and a sample foot pattern of the M3T-FLX-100NSD
