( 5 / 8 )
CAUTION
Cautions to Be Taken for Handling This Product:
• Do not disassemble or modify this product. Disassembling or modifying this product can cause
damage.
• Use caution when handling the main unit. Be careful not to apply a mechanical shock.
• Pins of the TQPACK may be broken even by a slight shock because they are very thin (0.25 mm).
Therefore, be careful when handling the TQPACK. Also be sure to connect the TQPACK and to
solder the TQPACK onto a user's board in the right direction.
• Connector pins of the TQPACK and the TQSOCKET are very thin and bent easily. Therefore,
handle the TQPACK and the TQSOCKET carefully as is the case with MCUs.
• When connecting the TQSOCKET to the TQPACK, after checking that there is no bend on the pins
of the both connectors and they are in the right direction, gently connect the connectors vertically
to the board.
• When using this product and MCU, be careful of static electricity.
• The TQSOCKET can be inserted and removed up to 100 times. When inserting and removing it
more than 100 times, exchange of the TQSOCKET044SAG is necessary. Please ask Tokyo Eletech
Corporation about purchasing the TQSOCKET044SAG.
• Do not apply unnecessary stress to the M37630T-RFS.
• Please contact Tokyo Eletech Corporation about dimensional drawings and specifications of the
TQPACK and the TQSOCKET.
• Request of repair is not acceptable.
