M30290T2-CPE User’s Manual
3. Usage (How to Use the Emulator Debugger)
REJ10J0494-0200 Rev.2.00 July 16, 2005
Page 46 of 86
3.3 MCU Setting Dialog Box
The MCU Setting dialog box is used to set the user system information. It is displayed after you closed the Init dialog box.
(1) MCU tab
1. Specifying the processor mode
2. Referring to the MCU Status
Cancel
Help
Specifying the processor mode
Select the appropriate processor mode that suits your
system. For the M16C/26A, 28 and 29 group MCUs, you
can specify only the following processor mode:
- Single-Chip Mode
Specifying the PM10 area (bit 0 of the
address 00005h)
Select this option when using the MCU in which the data
area access enable bit (PM10) is set to 1.
Cancel
Help
Referring to the MCU Status
It shows the pin status of the user system. Check it to see if
the MCU status matches the selected processor mode. If the
status of any pin is marked “NC”, it means that the pin
status is indeterminate.
Summary of Contents for M30290T2-CPE
Page 86: ...M30290T2 CPE User s Manual...
