M30880T-EPB User’s Manual
3. Usage (How to Use the Emulator Debugger)
REJ10J0497-0100Z Rev.1.00 January 16, 2005
Page 69 of 100
3.5 Trace Window
(1) Trace window
1. Trace window
Menu Menu
item Function
OptionalWindows Trace
Window
Opens
the trace window.
Trace window
The trace window is used to show the results of real-time
trace measurements. It has the following four display
modes:
- Bus
mode
Bus information per cycle can be inspected. The contents
are displayed in order of execution paths.
- Disas data access mixed mode
The executed instruction and the content of the accessed
data can be inspected together. Contents are displayed in
order of the execution paths.
- Disassemble
mode
The execution paths of the executed instructions can be
inspected. The contents are displayed in order of
execution paths.
- Source
mode
The execution paths of the source program can be
inspected.
These modes can be switched over using the respective
toolbar buttons.
The trace window shows the measurement result when a
real-time trace measurement has finished. The trace window
remains blank until the real-time trace measurement in
progress finishes.
Summary of Contents for Emulation Probe for M32C/88 Group M30880T-EPB
Page 100: ...M30880T EPB User s Manual...
