Renesas Emulation Memory Board R0E330850MSRC0 User Manual Download Page 4

 

5. Specifications 

Applicable compact emulator 

M30850T3-CPE 

Size of emulation memory installed 

4Mbytes 

Applicable MCU mode 

Memory expansion mode, Microprocessor mode 

Applicable power supply 

3.0 to 5.5 V 

Maximum operating frequency 

1Ø+1Ø : 32MHz* 

Emulation memory allocation 

Memory expansion mode:    Maximum 3.25Mbytes 
Microprocessor mode:   Maximum 4.00Mbytes 

*The restrictions in this product operating frequency depend on VCC2 power voltage. 
(These restrictions only need to be observed when using an emulator.)

 

(See Figure 2) 

 

Intelligent I/O 1wait read access 

3.0

Operating 
frequency

[MHz]

0

24

5.5

VCC2 

voltage[V]

 

 

Intelligent I/O 2wait

 

(set the PM13 bit to "1")

 

read access 

3.0

0

24

32

4.2

Operating 

frequency

[MHz]

5.5

VCC2 

voltage[V]

 

Figure 2 Restrictions in operating frequency when using this product 
(When using in single-power supply: VCC1 = VCC2, When using in dual-power supply: VCC1 = 5.0 ± 0.2 [V] fixed) 
 

6. Precautions 

 

 

WARNING

 

Warnings to Be Taken for This Product: 

 

z

 

Do not disassemble or modify this product. Personal injury due to electric shock may occur if this product is 
disassembled and modified. Disassembling and modifying the product will void your warranty. 

 

Warning for Installation: 

 

z

 

Do not set this product in water or areas of high humidity. Make sure that the product does not get wet. Spilling 
water or some other liquid into the product may cause unrepairable damage. 

 

Warning for Use Environment: 

 

z

 

This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care should be taken 
that this temperature is not exceeded. 

 

 

 

CAUTION

Cautions to Be Taken for This Product: 

 

z

 

Use caution when handling this product. Be careful not to apply a mechanical shock. 

z

 

Do not touch the connector pins of this product directly. Static electricity may damage the internal circuits. 

 

Caution to Be Taken for System Malfunctions: 

 

z

 

If the emulator malfunctions because of interference like external noise, do the following to remedy the trouble. 

(1)

 

Press the RESET button on the emulator upper panel. 

(2)

 

If normal operation is not restored after step (1), shut OFF the emulator once and then reactivate it. 

 

Caution to Be Taken for Using with M30850T2-CPE and M30870T2-CPE: 

 

z

 

Do not use this product with M30850T2-CPE and M30870T2-CPE. 

 

 

7. Inquiries 

 
For inquiries about this product or the contents of this manual, contact your local distributor. 
          Renesas Tools Homepage    http://www.renesas.com/tools 
 

(4/4)

 

Summary of Contents for Emulation Memory Board R0E330850MSRC0

Page 1: ... Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage liability or other loss resulting from the information contained herein z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake Please contact Renesas Technology Corporation Renesas ...

Page 2: ...ector J3 of the upper board and J2 of the R0E330850MSRC0 to connector J4 of the upper board 4 Tighten the spacers included in an even crisscross pattern to secure the R0E330850MSRC0 with such as box wrench 5 Attach connector J1 of the M30850T2 EPBM to connector J3 of the R0E330850MSRC0 and J2 of the M30850T2 EPBM to connector J4 of the R0E330850MSRC0 6 Tighten the four screws which are unscrewed i...

Page 3: ...urce in the user system IMPORTANT Notes on Selecting a Processor Mode of the M30850T3 CPE z When setting single chip mode do not connect to this product z When setting memory expansion mode the level of the pin CNVSS of the MCU status should be L z When setting microprocessor mode the level of the pin CNVSS of the MCU status should be H z When setting memory expansion mode or microprocessor mode t...

Page 4: ...ing and modifying the product will void your warranty Warning for Installation z Do not set this product in water or areas of high humidity Make sure that the product does not get wet Spilling water or some other liquid into the product may cause unrepairable damage Warning for Use Environment z This equipment is to be used in an environment with a maximum ambient temperature of 35 C Care should b...

Reviews: