Renesas E2 Emulator, User Manual

Page: 7 / 30

E2/E2 Lite Overview
R20UT4582EJ0100 Rev.1.00 Page 7 of 30
Jul.16.19
1.3 Supported Devices
Table 1.1 Supported Device List
Supported Device
E2 E2 Lite
SWD I/F FINE I/F SCI I/F SWD I/F JTAG I/F SCI I/F
RE0 series DBG

PRG DBG
 
* DBG: Can be used for debugging, PRG: Can be used for flash programming
1.4 Debugging Functions
Table 1.2 Debugging Function List
Item Supported Description
Memory reference or change during
program execution
√ 
Break
Software break
√
2000 points
Hardware break
√
Execution address: four points; data access: two
points
Forced break
√ 
Trace
√
Information acquired:
•
Branch-source PC values, branch-destination
PC values, occurrence of interrupts, and return
from interrupts
Start event:
•
Start of user-program execution
End events:
•
Stopping the user program and trace memory
becoming full
Performance measurement
√
Measurement item:
Between start and stop of user program execution
Hot plug-in
× 
Extended
function of the
E2
Solution for the tuning
of current
consumption
×
Current consumption by the user system is
measured when the power is supplied from the E2.
External trigger
input/output
×
External triggers can be input to or output from the
E2 expansion interface.
√
: Supported;
×
: Not supported