DOC2012/2000en
11
Draught diverter
The R2000 is fi tted with a draught diverter. It is possible to connect the flue outlet connection on the top
cover with a standard flue pipe. The inside of the draught diverter is made of aluminium.
The galvanized plate mantle is easily removed without the use of any special tools.
Fig. 3
Draught diverter
Combustion chamber
The chassis consists of two side frames with steel supports. Dura blanket type thermal insulation is sandwiched
between the vermiculite refractory blocks and front, rear and side panels of the combustion chamber housing.
These vermiculite refractory blocks are mounted so as to allow freedom of expansion.
The refractory blocks backed with the Dura blanket insulation, form the combustion chamber.
Fig. 4
Combustion chamber
Summary of Contents for R2000 Series
Page 50: ...DOC2012 2000en 50 Notes...
Page 51: ...DOC2012 2000en 51 Notes...
