Renault Radio Connect R & GO, Manual

Page: 22 / 254

GB.18
LISTENING TO THE RADIO
(1/3)
Selecting a waveband
Select the desired waveband (FM1,
FM2, DR1, DR2, AM, FM1 etc.) by re-
peatedly pressing button 3 on the audio
system front panel.
Choose an FM or AM radio
station
There are several different ways to
select and seek a radio station.
Automatic search
This mode performs an automatic scan
to search for stations. Press and hold
button 7 on the audio system front
panel.
When you release button
7 on the audio
system front panel, the frequency of the
nearest radio is displayed. The radio will
continue going up or down the frequen-
cies for as long as you press button 7
on the audio system front panel.
Manual search
This mode allows you to find stations
manually by scrolling through the fre-
quencies, by pressing button 7 on the
audio system front panel.
Press button
7 on the audio system
front panel; the frequency increases or
decreases.
Storage of radio stations
This operating mode allows you to
listen to your pre-set radio stations.
Select a waveband, then select a radio
station using the methods described
above.
To store a station, press and hold one
of the buttons on the audio system front
panel keypad 11 until you hear a beep.
You can save up to six stations per
waveband.
To recall a stored station, briefly press
one of the buttons on the keypad 11 .
Choose according to the
name of the station (FM / DR)
To select a radio station, turn control
knob 5 on the audio system front panel
or 20 or 23 on the steering column con-
trol.
This list can include up to 100 radio sta-
tions with the strongest frequencies in
your area.
To get the most recent list of stations,
update the radio list (FM or DR).
Refer to «Updating the radio list (FM or
DR)" in this section.