2.24
ENG_UD18934_2
Régulateur-limiteur de vitesse : fonction limiteur (X95 - B95 - D95 - Renault)
ENG_NU_837-6_BDK95_Renault_2
Jaune
Noir
Noir texte
Driving
When a limited speed has been stored
and this speed is not reached, driving is
similar to driving a vehicle without the
speed limiter function.
Once you have reached the stored
speed, no effort on the accelera-
tor pedal will allow you to exceed
the programmed speed except in an
emergency (refer to information on
“Exceeding the limit speed”).
Varying the limit speed
The limit speed may be changed by re-
peatedly pressing:
– switch
2
(+) to increase the speed;
– switch
3
(-) to decrease the speed.
Exceeding the limit speed
It is possible to exceed the limit speed
at any moment. To do this: press the
accelerator pedal
firmly and fully
(beyond the kickdown point).
While the speed is being exceeded, the
limit speed flashes on the instrument
panel and area
C
lights up red.
Then, as far as is possible, release
the accelerator pedal: the speed lim-
iter function will return as soon as you
reach a speed lower than the stored
speed.
Limited speed cannot be maintained
If driving up or down a steep gradient,
the system is unable to maintain the
limit speed: the stored speed on the
instrument panel will flash and zone
C
will light up in red to inform you of this
situation.
The speed limiter function is
in no way linked to the brak-
ing system.
C
2
3
5
4
CRUISE CONTROL/SPEED LIMITER: speed limiter function
(2/3)
Summary of Contents for MEGANE
Page 1: ...DRIVER S HANDBOOK MEGANE ...