Renault KANGOO Z.E. User Manual Download Page 122

Page: 122 / 230

2.22

Driving

Once a cruising speed is memorised

and the cruise control function is active,

you may lift your foot off the accelera-

tor pedal.

Switching on

Press switch

side



Indicator light

comes on, lit green, and

the message “CRUISE CONTROL” ap-

pears on the instrument panel, accom-

panied by dashes to indicate that the

cruise control function is activated and

waiting to store a cruising speed.

Please note that you must

keep your feet close to the

pedals in order to react in

an emergency.

CRUISE CONTROL

(2/4)

Activating cruise control

At a steady speed (above 18 mph

(30 km/h approximately)) press switch

or (+): the function is activated and the

current speed is saved.

The cruising speed replaces the dashes

and the cruise control is confirmed by

the appearance of a message on the

instrument panel and warning light

lit

green, as well as warning light

The cruise control switches to standby each time the ECO mode is activated or

deactivated. Please refer to the information on “ECO mode function” in Section 2.

Summary of Contents for KANGOO Z.E.







































































































































































































































Search results

Summary of Contents for KANGOO Z.E.

Reviews:

Related manuals for KANGOO Z.E.

Brands by name

Popular brands

Renault KANGOO Z.E., User Manual

Search results

Summary of Contents for KANGOO Z.E.

Reviews:

Related manuals for KANGOO Z.E.

Brands by name

Popular brands