3
INTRODUCTION
(2/4)
The Lane Centring function
Using information from a camera, the
Lane Centring function uses the steer-
ing system to direct the vehicle to the
middle of the lane. This function is only
available while the Stop and Go adap-
tive cruise control is activated.
➥
10 .
If the conditions allow it, the function is
available between:
– 0 mph and 99 mph (160 km/h) ap-
proximately with a vehicle in front;
or
– 37 mph (60 km/h) et 99 mph
(160 km/h) approximately without a
vehicle in front.
The Lane Centring function is a comfort
feature. It is represented by the follow-
ing symbol
➥
16 .
Note:
in the event of a sharp bend,
the function’s lateral retention capaci-
ties are limited and require the driver to
take immediate action on the steering
wheel.
