2.74
To engage neutral
With the vehicle at a standstill, engine
running, depress the brake pedal and
move the selector
3
to the left:
– hold in place for about a second until
a white
N
is displayed on the instru-
ment panel, then release;
or
– release immediately.
Note:
If the current gear is
R
or
D
, it
is not necessary to depress the brake
pedal to engage position
N
.
AUTOMATIC GEARBOX
(2/6)
To engage position P
(button
2)
With the vehicle at a standstill, engine
running or ignition on, press button
2
to
engage position
P
. The warning light for
button
2
lights up orange once the Park
position on the gearbox is engaged.
2
Check that warning light
P
on the instrument panel and
the warning light integrated
on the button
2
are acti-
vated before leaving the vehicle.
Risk of loss of immobilisation of the
vehicle
To disengage position P
(button
2)
With the vehicle at a standstill, engine
running, depress the brake pedal and
move the selector to the desired posi-
tion
R
,
N
or
D
.
If the brake pedal is not fully depressed,
the message “Push brake pedal” the
warning light
are displayed on the
instrument panel.
When position
R
or
D
is disengaged,
N
is displayed on the instrument panel
and the warning light on button
2
goes
out
.
Note:
– If the driver opens their door to leave
the vehicle while position
P
has not
been engaged, a beep sounds and
the message “P not engaged” is dis-
played on the instrument panel.
– Warning light
comes on each
time it is necessary to depress the
brake pedal to change the position
of the automatic gearbox.
In the event of the mes-
sage “Check auto gearbox”,
“Automatic gearbox posi-
tion P defective” or “Electric
failure DANGER”, or in the event of
a battery fault, immobilise the ve-
hicle using the electronic parking
brake.
3
Summary of Contents for Espace
