Renault 2016 Sandero Stepway Handbook Download Page 104

Page: 104 / 183

bonnet...................................................(up to the end of the DU)

4.2

ENG_UD22576_6

Capot moteur (B90 - Dacia)

ENG_NU_817-9_B90_Dacia_4

Jaune

Noir

Noir texte

Bonnet

BONNET

(1/2)

The engine may be hot

during operations in close

proximity. In addition, the

engine cooling fan may

come on at any moment.
Risk of injury.

In the event of even a slight

impact involving the radia-

tor grille or bonnet, have

the bonnet lock checked by

an approved Dealer as soon as pos-

sible.

To open the bonnet, pull the handle

Unlocking the bonnet catch

To unlock, raise the bonnet slightly and

release hook

by pushing tab

to the

left.

Opening the bonnet

Lift the bonnet, release stay

from its

holder; for your safety,

always

fix it in

location

Do not press down on the

bonnet: there is a risk that

the bonnet may accidentally

close.

Summary of Contents for 2016 Sandero Stepway
























































































































































































Search results

Summary of Contents for 2016 Sandero Stepway

Reviews:

Renault 2016 Sandero Stepway, Handbook, Page: 104 / 183

Search results

Summary of Contents for 2016 Sandero Stepway

Reviews: