manualshive.com logo in svg

Renault 2009 CLIO, Handbook

Share
Download
Renault 2009 CLIO Handbook Download Page 47

Jaune

Noir

Noir texte

1.41

ENG_UD13297_2

Sécurité enfants : installation du siège enfant (X85 - B85 - C85 - S85 - K85 - Renault)

ENG_NU_853-3_BCSK85_Renault_1

³

  Check the status of the airbag  

before fitting a child seat or allowing a  

passenger to use the seat.

CHILD SAFETY: installation diagram (sport tourer version)

Child  seat  fitted  using  the

 

ISOFIX

  

mounting

ü

 seat which allows an ISOFIX child  

seat to be fitted.

±

 the rear seats are fitted with an  

anchorage  point  which  allows  a  for- 

ward-facing ISOFIX child seat with uni- 

versal approval to be fitted. The anchor- 

age points are located in the luggage  

compartment.
The size of the ISOFIX child seat is in- 

dicated by a letter:
–  A, B and B1: for forward-facing seats  

in group 1 (9 to 18 kg);

–  C: rear-facing seats in group 1 (9 to  

18 kg);

–  D  and  E:  shell  seat  or  rear-facing  

seats  in  group  0  or  0+  (less  than 

13 kg);

–  F and G: cots in group 0 (less than  

10 kg).

Child seat attached using the belt

¬

  Seat which allows a seat with  

“universal” approval to be fitted using a  

seat belt;

−

  Seat which 

only

 allows a 

rear- 

facing seat

 with “Universal” approval  

to be attached with a seat belt.

Using a child safety system which is not approved for this vehicle will not  

correctly protect the baby or child. They risk serious or even fatal injury.

RISK  OF  DEATH  OR  

SERIOUS INJURY:

 before  

installing a rear-facing child  

seat  in  the  front  passen- 

ger seat, make sure the airbag has  

been deactivated (refer to the infor- 

mation on “Child safety: front pas- 

senger  airbag  deactivation/activa- 

tion” in Section 1).

Summary of Contents for 2009 CLIO









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands