U
S I N G
T H E
R
E C O R D
B
O O K
How Students Complete Assignments
. . . . .
82
AccelTest
User Manual
The student can repeat steps 6–8 to complete other homework assignments. (In
the list of Homework, ticked assignments are complete.) When the student has
finished all homework, the student must return to the menu, highlight
Synchronise
again and press
Select
to send the completed homework back to
the teacher’s computer for automatic scoring. Any homework that was not
completed will not be turned in during the synchronization.
Using the AccelScan Scan Cards
When you create assignments (see page 36) and choose the Scanner scoring
method, you must also choose to use printed assignments. When you assign the
assignment to students in your Record Book, the program prints a copy of the
assignment for each student. Each student has a unique form number at the top of
that assignment.
Make sure each student has a blank AccelTest scan card for this assignment.
Students follow the steps below to complete the assignment.
1.
The student fills in his or her unique form number at the top of the card and fills
in the circles for the form number as shown below.
2.
Next, the student fills in an answer for each multiple-choice question. If the
assignment has some free-response questions, the student must answer them
on a separate piece of paper.
3.
The student or teacher scans the card for scoring as described on page 83.
For Manual Scoring
When you created an assignment (see page 36), you may have chosen the Manual
scoring method. For this method, you can have students fill in their answers on the
assignment itself or a separate sheet of paper, or even an AccelTest scan card.
Then, the teacher must score the answers as described on page 85.
