Remuc Remuc-3, User Manual

Page: 10 / 42

10 REMUC-3 User Manual
Avoid the following installation spots with both antennae:

Inside, on top of or under (closer than 2cm) a metallic
structure. Metallic objects degrade the signal performance
drastically.

Under 20cm from persons inside the vehicle

Outside of the vehicle

In hot, cold and/or humid place. Allowed limits are -40 -
+85C, <95% relative humidity

On top of or in immediate vicinity of air bags or any other
active or passive protective equipment

In a place where it might prevent the correct use of the
vehicle or block the visibility from the vehicle
4. Install the use button
Use button has three purposes: switch
heater/default output on/off, acknowledge
new users and measure temperature. The
buttons should be installed to a location
where it is usable, but shielded from direct
air flow from ventilation channels.
Avoid install spots where user might accidently push the
button with hand or leg.
Note cable connector direction when plugging in.