Function Codes (cont.)
If successful, you will see two green flashes and hear two
beeps. If an error was made, you will see a red flash.
110: Add a Local User Code
Local User Codes are intended to be used as a backup
to User Codes created from the app. If internet is
unavailable, you can program a code directly from the
lock. Note that schedules cannot be applied to a Local
User Code.
Local User Codes can be 4–8 digits in length. To Add a
Local User Code, enter the following on the lock’s keypad:
Enter your
followed by the
#
button,
followed by
#
, and then enter your desired
followed by
#
.
Once set, the default User Code will be disabled after
your Local User Code is created.
120: Delete Local User Code
If you would like to remove your Local User Code, enter
the following on the lock’s keypad:
Enter your
followed by the
#
button,
followed by
#
, and then enter the existing
followed by
#
.
130: Erase ALL Local Codes
If you would like to remove ALL of your existing Local
Codes, enter the following on the lock’s keypad:
Enter your
followed by the
#
button,
followed by
#
.
