2M-BL3 supports the operation through the network. When a camera is first connected to the network it has no
IP address. So, it is necessary to allocate an IP address to the device with the “Smart Manager” utility on the CD.
Network Connection and IP assignment
3
1
Connect the 2M-BL3 to the network and power up.
2
•
Connecting to the Network
Connect a standard RJ-45 cable to the network port of the 2M-BL3. Generally a
cross-over cable is used for directly connection to PC, while a direct cable is used for
connection to a hub.
•
Micro SD memory slot
Insert the Micro SD memory card up to 32GB.
We recommend to use Class 6 or above.
Connection
2
Micro SD card slot
Remove the front cap
1
2
•
Connecting the Power
Connect DC 12V 500mA, 6.0W / PoE 125mA, 6.0W with IR on.
(Power over Ethernet IEEE 802.3af Class0)
①
Power Cable
Cable for Power source (DC 12V)
②
Ethernet Cable
Cable for Ethernet (POE)
Note:
Notes: Adapter for DC 12V is not supplied.
