Programming Manual
http://www.remotecontrol-express.com
-
TEL :
+44 (0) 207 399 7782 - FAX :
+44 (0) 207 927 3151
NICE Moon MOTX-R
Programming of your new keyboard with a FLOX-R receiver
1.
Open the casing of your receiver. It is located next to your motor.
2.
On the receiver circuit board, press the programming button (P1). Keep it pressed down. The
LED light on the receiver illuminates. Let the button go.
3.
Type « 11 » on the keyboard. Press the button «
». Keep it pressed down. The LED light
on the receiver turns off. Let the button go.
4.
Press the button «
» again for 2 seconds. The LED light on the receiver blinks three
times.
5.
Wait 10 seconds.
6.
Your keyboard is programmed.
