WIRING THE
M-TRONIKS
VIPER-10-12
/15
ESC
BATTERY PACK
7.2 - 12 VOLTS MAX
NOMINAL
FUSE. We suggest you use a
# RUE-300 3 amp Auto reset Polyswitch.
NOT required with BIK-U3/6.
REAR VIEW OF RADIO SHACK #273-1583
UNIVERSAL BODY MOUNT JACK (SOCKET).
MUST BE ISOLATED FROM TRACK & MOTOR.
DPDT is OFF when charging with BACH.
DPDT is ON for use with AUX-BAT.
RED
RED
BLACK
BL
A
CK
BL
A
CK
BIK-U Kit of parts.
GREY
OFF
ON
TOP
RED
BLACK
VIPER-10-12
M-
M+
PUSHBUTTON
JOIN PLUG AND SOCKET
TOGETHER FOR
UP TO 12 VOLTS
INSERT DIODE DROPPER AS SHOWN
FOR USE UP TO 15 VOLTS.
SET UP LED’s
Short Antenna
THRO 1
2
DIRECTION 3
4
F5 5
6
B
A
T/BIND
Three wire cable. Ensure plugs are correctly located.
wire towards top/front of RX.
Orange/White
Be aware that auto bind Rx’s have a different servo pin layout.
DSM2 MINI
6 Ch RX’s
MyLOCOSOUND
Whistle/Horn
Bell/Horn
Guards Whistle
Blowdown/Brake
Air Pump/Turbo
CHUFF TIMER
SIDE VIEW OF EM RX.
SERVO PLUG
YELLOW/WHITE SIGNAL
BLACK (NEGATIVE)
RED (POSITIVE)
SIDE VIEW OF RA RX
YELLOW/WHITE SIGNAL
BLACK (NEGATIVE)
RED (POSITIVE)
Max 2 amp load on each trigger.
SET
COM
2
1
MRW-SSDS
Plug # MRW-SSDS into Ch # 2 or Ch # 4.
SET
COM
2
1
MRW-SSDS
Plug # MRW-SSDS into Ch # 3 FOR
MANUAL DIRECTIONAL LIGHTING.
White
Front LED
LED’s must have a suitable dropping
resistor fitted in either the
+ (positive) or - (negative) circuit.
Rear LED
RED wire goes to long legs of LED’s
Yellow
470R
470R
