4
3-2-7. Connects B or C type REMOCON remote
control & HCD900 by using attached
cable.
Fig. 9
3-2-8. Press
Confirm
to program the code
into REMOCON remote control.
LCD displays duplication result as
Programming Success
or
Programming Failure
.
(Fig. 10)
Fig.10
3-3. Hopping Code Duplicate:
(Fig. 11)
3-3-1. Func.: Read and duplicate hopping
code from original remote controls
into REMOCON remote controls.
Fig. 11
Caution:
Some brands of hopping code remote controls were required to input
“seed
code
” before going to next step. To input “seed code”, please follow the
steps below:
a. Touch Fn & simultaneously.
b. LCD displays
“Receiving seed code”.(Fig. 12)
c. You can probably find the seed code button on the rear of original
remote control. It might be hidden in an eyelet. If so, you need a
acicular object to poke it for transmitting the seed code.
d. The LED displays (Fig. 13) when the
“seed code” was received.
Fig. 12 Fig. 13
FixedCode Duplicate
433.9
1 2 3 4
5
6 7 8 9 10
1 1 1 1
6 key spaces remain
Please Connect Remote
FixedCode Duplicate
1 2 3 4
5
6 7 8 9 10
1 1 1 1
6 key spaces remain
Programming success
HoppingCode Duplicate
1
2 3 4 5 6 7 8 9 10
10 key spaces remain
Please enter 1st code
HoppingCode Duplicate
1
2 3 4 5 6 7 8 9 10
10 key spaces remain
Receiving seed code
HoppingCode Duplicate
1
2 3 4 5 6 7 8 9 10
10 key spaces remain
Processing
Please enter 1st code
