5.
Insert the Wi-Fi stick into the interface.
6.
Place the display board including the socket
in its original position and fix it with the screw.
7.
Close the unit cover.
ML and MXW (from 08/2021)
The Wi-Fi stick is inserted into the existing inter-
face in the unit panel. The interface on the ML and
MXW series units is located on the interface board,
which is attached to the left-hand side of the rear
panel. The installation can be carried out as fol-
lows:
1.
Disconnect the system from the power
supply.
2.
Open the unit cover.
3.
Loosen the screw on the socket of the inter-
face board and remove the interface board
from the unit trim.
4.
Shorten the interface board at the predeter-
mined breaking point.
5.
Attach the remaining part of the interface
board to the panel and fix it with the screw.
6.
Insert the Wi-Fi stick into the interface.
7.
Close the unit cover.
11
Summary of Contents for Wi-Fi stick Smart-Control
Page 19: ......