REMKO KWT 200 DC, Assembly And Operating Instructions Manual

Page: 29 / 36

11.2 Spare parts list
Please contact REMKO GmbH & Co. KG directly to order spare parts.
All the spare part numbers for your unit can be found in the download area at www.remko.de.
IMPORTANT!
To ensure the correct delivery of spare parts, please always the device type with the corresponding serial
number (see type plate)
No. Designation KWT 200 DC
1 Front panel
On request by providing the
serial number
2 Side section, left
3 Side section, right
4 Cover
5 Back wall
6 Air intake grille, left
7 Air intake grille, right
8 Air intake grille, front
9 Air outlet flap, horizontal
10 Air outlet flap unit, vertical
11 Display board
12 Air filter
13 Mounting springs
14 Air outlet grille, outside
15 Air outlet grille, inside
16 Air pipe 160x900 mm
17 Mounting template
18 Infrared remote control
19 Mounting rail
20 Condenser fan
21 Condensate drain tray, condenser
22 Distribution unit
23 4-way valve assembly
24 Condensate drainage coil
25 Expansion valve coil
26 Condenser probe
27 Air outlet probe
28 Heat gas probe
29 Injection valve assembly
29