5
Assembly and installation
Important notes prior to installation
When installing the unit, observe the following points:
n
The installation must be carried out on a flat wall
n
Ensure that the wall meets the static requirements (consider the weight of the device as well as the
required holes to be drilled)
n
Install the device at least 10 cm from the floor. The maximum height should not exceed 100 cm (see
n
Ensure that there is space to the sides to allow trouble-free maintenance and/or servicing
n
Ensure that there are no adjacent objects which may obstruct the air circulation
n
Do not install the unit in close proximity to heat sources or electrical devices
n
By correctly placing the unit, ensure that the air stream is not directly aimed at people
1
2
A
Fig. 9: Mounting on a wall
A: Free air circulation
1: At least 80 cm
2: Minimum 10 cm, maximum 100 cm
REMKO KWT
14
