Installation inside buildings
n
Ensure that heat can dissipate adequately when placing the outdoor unit in cellars, lofts, adjoining rooms
n
Install an additional fan with a rated flow similar to that of the outdoor unit being installed in the room and
that can compensate any additional pressure loss in ventilation ducts (Fig. 18).
n
Ensure a continuous and unobstructed air flow from outside, preferably using sufficiently large air intakes
located immediately opposite if possible (Fig. 18).
n
Comply with any regulations and conditions affecting the statics of the building. If necessary, fit acoustic
installation.
2
1
K
3
W
3
W
Fig. 18: Outdoor installation inside buildings
K: Cold fresh air
W: Warm air
1: Chiller
2: Additional fan
3: Air shaft
REMKO KWE
34
