n
Safety devices may not be modified or
bypassed.
n
The units and components may only be set up,
installed and maintained by qualified per-
sonnel.
n
Do not operate units or components with
obvious defects or signs of damage.
n
The units may not be installed or operated in
explosive environments.
n
The units must not be installed or operated in
atmospheres containing oil, sulphur, chlorine or
salt.
n
The units and components must not be
exposed to any mechanical load, extreme
levels of humidity or extreme temperatures.
n
All housing parts and unit openings, e.g. air
inlets and outlets, must be free from foreign
objects. An unobstructed air inlet and air outlet
must be guaranteed at all times.
n
All electrical cables on the outside of the units
must be protected against damage (e.g. by ani-
mals etc.).
n
The units must be inspected by a service tech-
nician to ensure that they are safe to use and
fully functional at least once yearly. Visual
inspections and cleaning may be performed by
the operator when the units are disconnected
from the mains.
n
The refrigerant R32 used in the system is flam-
mable. If applicable, observe the local safety
conditions.
n
Note that refrigerant may be odourless.
1.8 Unauthorised modification
and changes
Modifications or changes to units and components
are not permitted and may cause malfunctions.
Safety devices may not be modified or bypassed.
Original replacement parts and accessories
authorised by the manufactured ensure safety. The
use of other parts may invalidate liability for
resulting consequences.
1.9 Intended use
The units are designed exclusively for drying and
dehumidification purposes in industrial or commer-
cial situations on the basis of their structural design
and equipment. The units must only be operated
by appropriately instructed personnel.
Any different or additional use is a non-intended
use. The manufacturer/supplier assumes no lia-
bility for damages arising from non-intended use.
The user bears the sole risk in such cases.
Intended use also includes working in accordance
with the operating and installation instructions and
complying with the maintenance requirements.
The threshold values specified in the technical
data must not be exceeded.
1.10 Warranty
For warranty claims to be considered, it is essential
that the ordering party or its representative com-
plete and return the "certificate of warranty" to
REMKO GmbH & Co. KG at the time when the
units are purchased and commissioned.
The warranty conditions are detailed in the "Gen-
eral business and delivery conditions". Further-
more, only the parties to a contract can conclude
special agreements beyond these conditions. In
this case, contact your contractual partner in the
first instance.
1.11 Transport and packaging
The devices are supplied in a sturdy shipping con-
tainer. Please check the equipment immediately
upon delivery and note any damage or missing
parts on the delivery and inform the shipper and
your contractual partner. For later complaints can
not be guaranteed.
WARNING!
Plastic films and bags etc. are dangerous
toys for children!
Why:
- Leave packaging material are not around.
- Packaging material may not be accessible to
children!
REMKO ETF-S Series
6
