10
AUTOMATIC 45%-55%
COMFORT 55%-65%
MAXIMUM
VENTILATION
Shutting Down the Unit
Switch the unit off by pressing the
“On/Off” button D.
Unit Transport
The unit is equipped with wheels and a handle to make
it easy to transport.
◊
Prior to moving the unit, switch the unit off and un-
plug it.
◊
Then empty the condensation collector.
Watch out for condensation that drips out.
◊
Do not use the power cord to pull the unit.
Prior to longer periods of non-operation
1. Unplug the power cord.
2. Empty the condensation collector and dry it with a
clean towel.
Watch out for condensation that drips out.
3. Follow the instructions for cleaning the air intake fil-
ter.
4. To prevent dust from getting inside the unit, protect it
with, for example, a plastic cover.
5. Store the unit in an upright position in a location pro-
tected from dust and direct sunlight.
D
Cleaning the filter
To prevent damage to the unit, it is equipped with an air
intake filter.
The air intake filter must be inspected as necessary,
however, at least every two weeks, and cleaned if re-
quired to prevent its performance from suffering or
problems with the unit.
1. Switch the unit off by pressing the
“On/Off” button.
2. Reach into the opening G and pull
the air intake filter out of the unit.
3. Clean the air intake filter with
warm water or with a vacuum
cleaner.
4. Remove heavy dirt by rinsing the
unit in a soapy solution at a maxi-
mum temperature of 40 °C.
Then rinse with clean water.
5. Keep in mind that the air intake fil-
ter may not be damaged and must
be completely dry before being re-
placed to prevent damage to the
unit.
Timer mode
The “Timer” button (see page 8) is used to activate
operation of the unit at a programmed time. The unit
switches on or off after the preset time has elapsed.
Timer mode is indicated on the display by a clock
symbol.
Switching the unit on automatically
1. While the unit is switched off,
press the “Timer” button.
The Symbol 4 and "On" appear on
the display.
2. Press the “Timer” button until the
desired amount of time 5 appears
on the display in hours.
4
5
3. Select the operating mode you want by pressing the
“Operating mode” button several times.
4. Select one of the two fans speeds with the “Fan
speed” button in the COMFORT and MAXIMUM op-
erating modes.
5. Keep in mind that the unit automatically switches on
with the selected settings after the set time has
elapsed.
The Symbol 4 and “On” disappear from the display.
6. Press the “On/Off” button if you want to switch on the
unit before the set time has elapsed.
Switching the unit off automatically
1. While the unit is switched on,
press the “Timer” button.
The Symbol 4 and “Off” appear on
the display.
2. Press the “Timer” button until the
desired amount of time 5 appears
on the display in hours.
4
5
3. Keep in mind that the unit automatically switches off
after the set time has elapsed.
4. Press the “On/Off” button if you want to switch off the
unit before the set time has elapsed.
G
The unit may never be operated without the air in-
take filter!
G
Summary of Contents for ETF 220
Page 2: ......