4
REMKO ELT series
Safety notes
Always observe the respective local building code and fire prevention
guidelines as well as the guidelines of the accident prevention and
insurance associations when using the units.
The units have been subjected
to extensive material, functional
and quality inspections prior
to delivery. However, dangers can
arise from the units if they are
used improperly or not as intended
by untrained personnel!
Please observe the following notes
■
The personnel tasked with
operating the units must check
the units for visible defects on
the operating and safety devices
as well as the presence and
function of the protective devices
prior to starting work
Inform
the supervisor if defects are
discovered!
■
In the event of defects that
endanger the operational safety
of the unit, operation must
be discontinued immediately
■
Observe the respective local
regulations and the relevant
electrical safety measures when
using the units
■
Maintain safety distances
to combustible materials
■
An unobstructed air inlet and air
outlet must be guaranteed at all
times
■
The air outlet must not
be constricted or equipped with
pipe or hose lines
■
Never insert foreign objects into
the units
■
The units must not be covered
during operation
■
Safety devices must not
be bypassed or disabled
■
The units must not be operated
in the vicinity of bathtubs,
showers, swimming pools etc.
■
The units must not be operated
directly below a wall socket
■
The units must not be exposed
to direct jets of water
e.g.
pressure washers etc.
■
Never allow water to enter
the units
■
The units must not be installed
or operated in potentially
flammable or explosive
environments
■
The units must not be installed
or operated in atmospheres
containing oil, sulphur or salt
■
All electrical cables for the
units must be protected against
damage, even damage caused
by animals
■
The units must be set up in
a stable, horizontal position
Unit description
The units are portable electric
heating units for industrial
applications.
The units are operated exclusively
with electric power and have been
designed in such a way that they
can be used fully automatically,
universally and in a straightforward
manner.
The units are equipped with
specially enclosed electric heating
resistors, low noise and low-
maintenance axial fans, a safety
and aftercooler thermostat, an
integrated room thermostat and
a power cable with protective
contact plug.
The units conform to
the fundamental health and safety
requirements of the appropriate
EU stipulations.
The units are dependable and offer
ease of operation.
The units may be used among
other things for the following:
■
Drying newly completed
buildings
■
Spot heating outdoor
workspaces or fire-proof
manufacturing facilities and
halls
■
Continuous or temporary room
heating
■
De-icing machines, vehicles and
non-combustible warehoused
goods while adhering to
the relevant safety distances
CAUTION
Safety devices must not be
bypassed or disabled.
Summary of Contents for ELT 2-1
Page 2: ......
