REMKO ELT 10-HT, Operation,Technology,Spare Parts

Page: 11 / 12

11
Spare parts list
Technical data
1) Noise level measurement DIN 45635 - 01 - KL 3
Series ELT 10-HT
Nominal heat capacity kW 10.5
Switchable heating capacity kW Thermodynamic
Air volume m
3
/h 400-900
Air outlet temperature °C up to 120
Maximum ambient temperature °C 60
Power supply V/Hz 400/3~N / 50
Max. rated current A 15.9
Max. power consumption kW 11
Electrical protection (provided by the customer) A (slow) 16
Sound pressure level L
pA
1m
1)
dB (A) 70
Dimensions: Length mm 750
Width mm 305
Height mm 500
Weight kg 18.0
No. Designation EDP
21 Grommet for mains cable
EDP no. on
request
22
Fan with motor and protection
grid
23 Condenser
24 “RED” light (STB fault)
25 “GREEN” light (max. heating capacity)
26 “YELLOW” light (HT mode)
27 Thermostat receptacle assembly
28 6.3 A control fuse
29 Speed controller adjusting knob
30 Operating switch 1-0-2
31 Speed control film
32 Mains cable with plug
33 M012 speed control
34 Terminal block 6er (1.5 mm²)
35 Speed controller
36 Safety thermostat STB
Not
illustrated Thermostat plug
Not
illustrated Strapping plug
Not
illustrated Operating hours counter
No. Designation EDP
1 Transport handle
EDP no. on
request
2 Reinforcement plate
3 Outer casing ELT 10-HT
3a Outer casing ELT 10-HT INOX
4 Front panel with outlet nozzle
5 Floor panel
6 Front plate of floor panel
7 Support plate, right
8 Heating insert assembly
9 Back wall
10 Support plate, left
11 Inner casing with outlet cone
12 Cover plate for STB
13 Mounting plate
14 Terminal block 6er (6 mm²)
15 Contactor
16 Aftercooler thermostat
17 Control thermostat with probe
18 Safety clamp for mains cable
19 EMC filter
20 Terminal block 5er (16mm²)
When ordering spare parts, please state the EDP no., unit number and type (see name plate)!