Example TIMER function settings
"TIMER ON" (Auto on mode)
Example:
You want the air conditioning unit to switch on 2
hours from the time it was programmed.
1.
Press the "TIMER ON" key. The last oper-
ating time setting for the timer, and the "H"
symbols, appear on the display.
2.
Press the "TIMER ON" key until the desired
start time is shown in the "TIMER ON" area
on the remote control.
3.
Wait for 3 seconds and the temperature
appears again in this area of the digital dis-
play. The "TIMER ON" indicator stays lit, and
this function is activated.
Start
Off
2 hours later
Set time
Fig. 12: "TIMER ON" example
"TIMER OFF" (Auto off mode)
Example:
You want the air conditioning unit to switch off 4
hours from the time it was programmed.
1.
Press the "TIMER OFF" key. The last oper-
ating time setting for the timer, and the "H"
symbols, appear on the display.
2.
Press the "TIMER OFF" key until "10H" is
shown in the "TIMER OFF" area on the
remote control.
3.
Wait for 3 seconds and the temperature
appears again in this area of the digital dis-
play. The "TIMER OFF" indicator stays lit,
and this function is activated.
Stop
On
4 hours later
Set time
Fig. 13: "TIMER OFF" example
Combined TIMER (setting "TIMER ON" and
"TIMER OFF" at the same time)
"TIMER OFF
ð
"TIMER ON"
(On
ð
Stop
ð
Start)
Example:
You want the air conditioning unit to switch off in
two hours from the time it was programmed, and
switch back on ten hours later.
1.
Press the "TIMER OFF" key.
2.
Press the "TIMER OFF" key again until the
desired stop time is shown in the "TIMER
OFF" area on the remote control.
3.
Press the "TIMER ON" key.
4.
Press the "TIMER ON" key again until "10H"
is shown in the "TIMER ON" area on the
remote control.
5.
Wait for 3 seconds and the temperature
appears again in this area of the digital dis-
play. The "TIMER ON" and "TIMER OFF"
indicators stay lit, and this function is acti-
vated.
On
Set time
Stop
Start
2 hours later
after setting
10 hours later
after setting
Fig. 14: "TIMER OFF" / "TIMER ON" example
REMKO ATY
16
Summary of Contents for ATY 265
