3
Mounting the adapter
3.1 Connection to the REMKO
Smart-Control Touch controller
NOTICE!
Only use the unit in dry areas and protect it
from electromagnetic radiation.
use
The REMKO adapter must be used if it is not pos-
sible to connect the REMKO Smart-Control Touch
controller to the W-LAN network of the in-house
router.
To do this, install the adapter directly on the panel
of the Touch Display.
The adapter can now be connected with a patch
cable (LAN cable).
The cable must be connected directly to the router.
NOTICE!
The router must be set up by a specialist
Fig. 1: USB Ethernet adapter
1
4
2
3
1: Router (example)
2: Patch cable
3: LAN adapter
4: Heat pump
REMKO Ethernet adapter
8
