5
BASIC HAIR CARE INSTRUCTIONS
The Wet 2 Straight PRO Straightener is designed with an Advanced
Wet 2 Straight Technology, which combines an exclusive venting system
and a moisture sensor, to style your hair in half the time with 3x more
protection*.
•
For optimal results, shampoo and condition your hair prior to styling.
•
For extra protection use a heat protection spray.
•
Hairsprays contain flammable material - do not use while using this
product.
Note:
This appliance is not recommended for use on synthetic wigs or hair
extensions.
WET 2 STRAIGHT PRO TECHNOLOGY: MOISTURE SENSOR &
EXCLUSIVE VENTING SYSTEM
•
The moisture sensor adjusts the temperature of the plates on each
pass to ensure the optimum temperature is delivered - preventing
damage.
•
Meanwhile, the vents allow to quickly remove excess water, meaning
you can skip the time consuming step of blow drying.
USING YOUR WET 2 STRAIGHT PRO SAFELY ON DRY & WET HAIR
This straightener is safe for use on dry and wet hair, using either dry or wet
mode.
DRY MODE – USE ON DRY HAIR
•
Dry mode is the default setting when the styler is turned on, the
backlight on the display is white.
•
To use on wet hair see ‘WET MODE’ below.
•
Select the appropriate temperature for your hair using the +/- controls
on the side of the product. Start styling on the lower temperatures
first.
•
The ‘+’ button will increase the temperature the ‘-‘ button will
decrease the temperature.
•
The temperature shown on the display will stop flashing and the
device will beep three times when it is ready to use.
•
Working on one section at a time, run the straightener through the
entire length of the hair without stopping.
•
After use, press and hold the on/off (
C
) button for two seconds to turn
off then unplug the appliance.
