![background image](http://html1.mh-extra.com/html/remington/trim-and-shape-bkt-2000/trim-and-shape-bkt-2000_use-and-care-manual_1437677007.webp)
7
HOW TO USE YOUR TRIMMER
%
Ensure that the trimmer has been charged.
%
Set the ‘Thumb Wheel’ to the desired length setting – suggest start
at #4 or #5.
%
Turn trimmer on.
%
Place the flat top end of the trimmer comb against the skin.
%
Slowly slide the trimmer through the hair to be trimmed. The hairs will
feed right into the comb tines.
%
Repeat this trimming motion as necessary, adjusting to approach the
desired area from different directions.
%
If, during the trimming process, hair builds up in the trimmer comb, shut
the unit off, pull off the adjustable trimmer comb and brush it off.
%
For an even closer look and precise shaping, remove the adjustable trimmer
comb and trim the hairs along the outer edge of the intended area.
%
When finished, turn the trimmer off, clean, and return to the storage pouch.
CLEANING AND MAINTAINING YOUR TRIMMER
Clean your trimmer regularly to ensure that the unit’s operating life is not
prematurely shortened.
%
Do not apply pressure or hard objects to the cutters.
%
Do not use liquid cleaners on the cutters or harsh or corrosive chemicals
on the unit’s body.
WEEKLY
%
Turn Trimmer off.
%
Remove trimmer comb attachment from trimmer. Shake or blow out any
accumulated hairs.
%
Flip the blades open by pushing upward on the cutter teeth. The cutter
assembly will swing up and the underside of the cutter will be accessible.
%
Blow or use a small brush to sweep any accumulated hair from the back
of the cutter. You may also need to rinse it under running water.
Note: Only the cutter assembly and the adjustable trimmer comb
attachment may be removed from the trimmer and cleaned as
detailed above.
Do not use any liquid cleaners or harsh chemicals. Do not
disassemble the cutter set.