How to Use
6
7
Batteries
The BKT-1500 runs on 2 AAA batteries.
Inserting the batteries
■
Make sure the trim-
mer is turned OFF.
■
Open the battery
compartment by
pressing its tab in
toward the door and
lifting the door up.
■
Insert the batteries so
that the (+) and (-) marks on the batter-
ies face the same marks inside the
battery compartment. The BKT-1500
will not operate if batteries are inserted
incorrectly.
■
Replace the battery cover by inserting
the end opposite the tab and then press-
ing the tab until it clicks into place. The
battery cover fits only one way. If it does
not go on correctly, try turning it around.
Battery Care
■
To prevent battery corrosion, keep the
groomer in a dry environment.
■
Batteries should not be left in the unit
if it is not in use for long periods.
■
Dead batteries should be removed
immediately and disposed of properly.
Can’t turn on the BKT-1500?
■
The batteries may be improperly
installed. The trimmer will not operate
unless the batteries are positioned
correctly.
■
The batteries may be depleted. Replace
them with 2 new AAA batteries.
Adjusting the Trim Length
You can set your Trim & Shape
®
to give you
5 different trim lengths--from a bold 1/8
inch to a demure 1/2 inch. Simply turn the
Thumb Wheel to a lower setting for shorter
lengths and a higher setting for longer
lengths. The wheel will click into place as
it reaches each setting, and the setting
number will appear on the Length Position
Indicator. Here’s what the length settings
mean:
Setting
Hair Length
1
1/8”
2
3/16”
3 1/4”
4
5/16”
5
1/2”
Attachments
The Trim & Shape
®
trimmer’s attachments
give you 3 ways to achieve the look you
want:
■
Use the adjustable trimmer comb attach-
ment to trim the hair in the bikini area.
■
Use the shaver attachment for touch-up
shaving in tight spots.
■
Use trimmer blade without attachments
to define or shape hairline.
Changing attachments is easy. Whether
you are taking an attachment off or putting
one on, it’s best to hold the trimmer in one
hand with your thumb firmly on the Thumb
Wheel to keep it from turning. The Thumb
Wheel can be pointed to any setting, but
the trimmer must be turned off.
Removing shaver and comb attachments
The shaver and trimmer comb are removed
the same way.
1. Make sure the trimmer
is turned off.
2. Hold the Thumb Wheel
still.
3. Hold the attachment by
the plastic sides and
pull it straight off the
trimmer.
Adding the shaver
attachment
1. If the trimmer comb
attachment is on the
unit, remove it.
2. Remove the trimmer
blade by gently pushing
upward on its teeth until
it pops off the unit.
3. Hold the shaver attachment by the plas-
tic sides, and slide it into the grooves on
either side of the trimmer head until it
clicks into place. Don’t press down on
the foil, or it could become damaged and
irritate your skin when you use it.
Adding the trimmer blade
1. If the shaver attachment is on the unit,
remove it.
2. Slide the trimmer blade’s plastic tab into
its slot in the
trimmer head.
3. Push down on the
blade’s teeth until it
clicks into place.
Adding the trimmer comb attachment
1. Make sure the trimmer blade is already
in place.
2. Slide the comb over the top of the
trimmer until it clicks into place.
!
The attachments fit only one way. If the
attachment does not go on correctly, turn it
around and try again.
CS27547_BKT-1500_IB 1/19/06 2:06 PM Page 6
