HOW TO REPLACE THE FOIL & CUTTERS
Please refer to the specifications’ table on page 5 of this manual that lists
the correct replacement part number of your shaver.
Remove the foil assembly by pressing the foil assembly release buttons on
either side of the head and lifting the assembly upwards to remove from the
hair pocket
•
Grasp each cutter between your thumb and forefinger and pull
upwards to remove
•
Snap each new cutter into the top of the drive shaft.
Note: Do not push on the ends of the cutters as this may cause damage and
reduce their effectiveness.
•
Insert the new foil assembly on top of the hair pocket, press down and
click into place.
BATTERY DISPOSAL
Note: The battery is not intended to be removed or replaced under normal
use. The only time the battery should be removed or the unit opened
or disassembled, is at the end of the product’s useful life before it is
discarded.
•
The F5500AU shaver contains a nickel metal hydride battery. Once the
trimmer has reached the end of its life, to ensure proper disposal of
the product, please take the appliance to a recycling centre, where the
internal rechargeable battery should be removed by a professional and
recycled separately.
•
For more information about recycling of electrical and battery operated
appliances, please contact your local council office or your household
waste disposal service.
Caution:
Do not put in the fire or mutilate your batteries when disposing as
they may burst and release toxic materials. Do not short circuit as it may
cause burns.
We suggest you use local waste management centres to recycle this
product at end of life.
14
Suitable for use in bath and shower.
This product conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
Summary of Contents for Style F5 Series
Page 9: ......
