Cleaning and Maintenance
Replacing the Brush Head
• To ensure long lasting performance of your toothbrush, clean the brush head and
the handle regularly.
• Ensure the toothbrush is switched off before cleaning.
• DO
NOT
attempt to clean any part of this product in a dishwasher.
• DO
NOT
Submerge the brush handle or charging stand in water.
• Brush Head: Rinse the brush head and bristles after each use.
• Brush Handle: Remove the brush head and rinse the
shaft under warm water. To clean the handle, wipe with
a damp cloth.
Fig. 4
• Charging stand: Wipe with a damp cloth.
• CA
UTION:
Ensure all parts are dry before connecting
the charger into a wall socket.
Product Disposal
• The battery must be removed from the toothbrush before
the device is thrown away.
• The product must be disconnected from the charging base
when removing the battery.
To remove the rechargeable battery:
Fig. 7
1.
Run the toothbrush until the motor stops and the battery is
fully discharged.
2.
Use a small phillips head screwdriver to remove the
assembly screw at the bottom of the toothbrush handle.
3.
Remove the bottom cap.
4.
Pry the two small snap details open inside the base of the
handle to release the inner core of the toothbrush. Slide the
inner core out the bottom of the handle.
5.
Insert a flat screwdriver next to the battery connections and twist to break the
connections.
6.
Pry the battery from the inner core.
7.
Dispose of the battery safely.
C
LEAN
SEN
SITIVE
MA
SS
A
GE
4
CLEAN
SENSITIVE
MASS
AGE
7
Limited One-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty
material or workmanship for a one-year period from the original date of consumer
purchase. This warranty does not include damage to the product resulting from
accident or misuse. If the product should become defective within the warranty
period, we will replace it free of charge. Return your product and sales receipt with
your name, address and day time phone number to:
Remington Returns Center, 507
Stokely Dr., P.O. Box 1, Deforest, WI 53532. For more information call 800-736-4648
in the US or 800-268-0425 in Canada.
Warranty excludes:
• Brush heads
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
This warranty does not cover products damaged by the following:
• Accident, misuse, abuse or alteration of the product
• Servicing by unauthorized persons
• Use with unauthorized accessories
• Connecting it to incorrect current and voltage
• Wrapping cord around product causing premature wear and breakage
• Any other conditions beyond our control
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
ONE YEAR FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Warranty
Declaration of Conformity
“This equipment has been tested and found to comply with the limits for a Consumer ISM
equipment, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.”
“Please note that changes or modifications of this product is not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.”
“If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.”
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.”
Questions or comments:
Call 800-736-4648 in the US or 800-268-0425 in
Canada. Or visit
RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by: Spectrum Brands Canada, Inc., 131 Saramia Crescent, Vaughan, ON L4K 4P7
® Registered Trademark and TM Trademark of Spectrum Brands, Inc.
© 2016 Spectrum Brands, Inc. 2/16 14904-00
Made in China
T22-0003651-E
Environmental Protection
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, products marked
with this symbol must not be disposed of with unsorted municipal
waste, but recycled.
Brushing
1.
Run the brush head under water to wet the bristles, and
add toothpaste.
2.
Hold the brush so the bristles are touching the teeth at a
slight angle (facing towards the gumline)
Fig. 1
3.
Press the on/off switch to turn on the toothbrush.
4.
Apply light pressure and gently brush the teeth in short,
back and forth strokes.
The recommended brushing time is 2 minutes, twice a day.
Instructions for Use
1
Your SonicFresh
TM
toothbrush is provided with three colored
rings to identify brush heads if the brush handle will have
multiple users.
To personalize the brush heads:
1.
Remove the blue rubber ring from the base of the tooth
brush head by gently peeling it off.
Fig. 5
2.
Replace the rubber ring with the colored ring of your
choice by stretching it over the end of the brush head
and aligning the locking tabs into the holes on the brush
head.
Fig. 6
5
6
Personalize Rings
For best results, we recommend replacing the brush head approximately every
3 months.
1.
Hold the brush handle with one hand.
2.
With the other hand, twist the brush head counterclockwise and gently pull the
head upwards until it comes off.
Fig. 2
Attaching the brush head:
1.
Slide the brush head on to the handle and turn clockwise until secure.
Fig. 3
Replacement Brush Head Model Number:
• SFR201 (2 pieces)
• SFR401 (4 pieces)
CLEAN
SENSITIVE
MASSAGE
CLEAN
SENSITIVE
MASSAGE
2
CLEAN
SENSITIVE
MASSAGE
CLEAN
SENSITIVE
MASSAGE
3
