5
BASIC HAIR CARE INSTRUCTIONS
The Smooth Finish Ceramic straightener is designed to give you smooth
straight hair quickly, easily and with professional results.
For optimal results, shampoo and condition your hair prior to straightening,
then dry your hair thoroughly and make sure that it is tangle free.
Note: The Smooth Finish Ceramic is not suitable for use on synthetic wigs or
hair extensions.
AUTOMATIC VOLTAGE ADJUSTMENT
The Smooth Finish Ceramic features automatic voltage adjustment for
international use. Plug the unit into any domestic power outlet and it will
adjust automatically to the voltage being supplied.
Note: Some countries will require the use of a plug adaptor that is
not included with your straightener.
AUTO OFF SAFETY FEATURE
If the styler is not used for a period of 60 minutes (temperature is constant) it
will automatically shut off.
HOW TO USE YOUR REMINGTON® SMOOTH FINISH CERAMIC
Place the straightener on a flat, hard, heat resistant surface ensuring the
sides of the plates do not come into contact with the surface. Plug in to any
household (120/240V AC) power outlet. Slide the on/off switch to the on
position.
The on and ready LED indicator light will flash indicating that the straightener
is heating. When the temperature of the plates has reached the temperature
selected on the variable temperature dial the LED indicator light will remain
steady. Rotate the variable temperature dial clockwise to increase the
temperature. To decrease the temperature, rotate the variable temperature
dial anti clockwise. The lowest temperature setting is 150°C. The highest
temperature setting is 230°C. The straightener will be ready to use in 15
seconds depending on the temperature selected.
Take extra care when using the straightener, as it can get very hot. It is
important to establish the correct temperature for your hair type prior to use,
to prevent damage to your hair. If in doubt, start with a low temperature
setting first using the variable temperature dial and increase the heat
gradually. When you have finished styling slide the on/off switch to the off
position.
