Remington S7200 Page 3 Manual Download

Page: 3 / 48

ENGLISH

2 Do not put the appliance in liquid; do not use it near water in

a bath-tub, basin or other vessel; and don’t use it outdoors.

3  Keep the hot straightening plates away from the skin.
  Ensure steam vents are directed away from face, head or hair and
are not covered by hands.
4  Do not leave the appliance unattended while plugged in.
5  Only set the appliance down on a heat-proof surface.
6  Do not use attachments other than those we supply.
7  Do not twist or kink the cable, or wrap it round the appliance.
8  Do not use the appliance if it is damaged or malfunctions.
9  If the cable is damaged, it must be replaced by the manufacturer, its service agent, or

someone similarly qualiied, in order to avoid hazard.

10 This appliance is not intended for commercial or salon use.
11 Let the appliance cool down before cleaning and storing away.

INSTRUCTIONS FOR USE

This Straightener can be used on wet or dry hair

Wet mode

– use on towel dried hair

Towel dry hair well before styling.

* Do not use on dripping wet hair
When you turn on the straightener it will automatically set itself to wet mode. It will

default to 200°C which is the minimum temperature required for Wet mode

straightening. This is indicated by the cloud icon.

* Before using the straightener on wet hair ensure the straightener has fully heated to

your desired temperature between 200°C - 230°C.

Select appropriate temperature for you hair type using the controls on the side of the

straightener.

* When straightening wet hair you will hear a hissing sound and the unit will steam. This

is a good thing – it is the sound of excess water in your hair evaporating and this is not

harmful to the condition of your hair.

Dry mode –

use on dry hair

1 Before use, ensure the hair is clean, dry and tangle-free.
2 Select appropriate temperature for your hair type using the controls on the side of the

straightener.

Recommended Temperatures:

Temperature

Hair type

140°C - 170°C

Fine

170°C - 200°C

Medium

200°C - 230°C

Thick

General use:

1 Plug in the styler and press and hold the on button to switch on.
* When the styler is plugged in but not turned on a lock symbol will show in the display

window indicating the styler is in stand by mode.

2 Start styling on lower temperatures irst. The temperature bars and display will stop

lashing once desired temperature is reached.

3 Section the hair prior to styling. Style the lower layers irst.
4 Working on one section at a time run the straightener through the entire length of the

hair, without stopping.

5 Repeat only twice per section to prevent damage to the hair.
6 When inished press and hold the of button for two seconds to turn of and unplug the

appliance.

Switch lock function

Set the desired temperature by pr/- buttons and lock the switch settings by pressing the

‘-‘ button for 2 seconds. A ‘padlock’ symbol will appear next to the temperature.

To unlock the switch settings, press and hold the ‘-‘ button again for 2 seconds.

Hinge lock for storage

Plates can be shut together for easy storage
Locked- Push the hinge lock up to the locked position
Unlocked- Pull the hinge lock down to the unlocked position

NOTE: Do not heat the unit in the locked position

CLEANING AND MAINTENANCE

Unplug the appliance and let it cool.
Wipe all surfaces with a damp cloth.

Don’t use harsh or abrasive cleaning agents or solvents.

Replacement parts and accessories available to buy at

http://www.remington.co.uk/parts-

accessories