background image

7

Switch Lockout
(Left side)

Guide Bar

Rear Handle

Power Cord

Rear Hand Guard

Front Hand 
Guard

Saw Chain

Guide Bar Nose

Oil Cap With 
Squeeze Bulb

Motor Housing

Oil Level Sight Hole (located 

on saw body, hidden by front 

handle)

Front Handle

Sprocket 
Cover

Scabbard

Trigger

ENGLISH

PRODUCT IDENTIFICATION

Bucking

  Process of cutting a felled tree or log into 

lengths.

Felling

  Process of cutting down a tree.

Felling Cut

  Final cut when felling a tree. Make this 

cut on opposite side of tree from notching cut.

Front Handle

  Located at front of saw body.

Front Hand Guard

  Shield between front handle and 

guide bar. Protects left hand while using saw.

Guide Bar

  Metal bar that extends from saw body. 

The guide bar supports and guides chain.

Guide Bar Nose

  

Tip or end of guide bar.

Kickback

  Quick backward and upward motion of 

guide bar. Kickback may occur when tip of guide bar 
touches an object while chain is moving. The guide 
bar will kick up and back towards operator.

Limbing

 

 

Process of cutting limb(s) from a felled tree.

Low-Kickback Chain

  Chain that reduces chance of 

kickback as required by ANSI B175.1.

Normal Cutting Position

  Stance used while making 

bucking and felling cuts.

Notching Cut

  Notch cut in tree that directs fall of 

tree.

Oiler Control

  System for oiling guide bar and chain.

Power Head

  Chain saw without chain and guide 

bar. Also known as saw body.

Pushback (Kickback, Pinch)

  Rapid pushback of chain 

saw. Pushback may occur if chain along top of guide 
bar is pinched, caught, or contacts a foreign object.

Rear Handle

  Handle located at rear of saw body.

Reduced Kickback Guide Bar

  Guide bar that re-

duces chance of kickback.

Replacement Chain

  Chain that complies with ANSI 

B175.1 when used with a specific saw. It may not meet 
ANSI requirements when used with other saws.

Saw Chain (Chain)

  Loop of chain having cutting 

teeth for cutting wood. The motor drives chain. The 
guide bar supports chain.

Spiked Bumper (Spike)

  Pointed teeth at front of 

saw body beside guide bar. Keep spiked bumper in 
contact with wood when felling or bucking. It helps 
maintain position of saw while cutting.

Sprocket

  Toothed wheel that drives chain.

Switch

  Device that completes or interrupts electrical 

circuit to motor of saw.

Switch Linkage

  This device connects switch to trig-

ger. It moves switch when you squeeze trigger.

Switch Lockout

  Device that reduces accidental 

starting of saw. 

Trigger

  

Device that turns saw on and off. Squeezing 

trigger turns saw on. Releasing trigger turns saw off.

Trimming (Pruning)

  

Process of cutting limb(s) from 

a living tree. 

Undercut

 

 

An upward cut from underside of log or 

limb. This is done while in normal cutting position 
and cutting with top of guide bar.

CHAIN SAW NAMES AND TERMS

Summary of Contents for RM1215U





























































Reviews: