Remington REVITALISE FC1001AU, Use And Care Manual

Page: 10 / 12

10
CLEANING AND MAINTENANCE
• To ensure long lasting performance of your cleansing brush, clean the brush head and the
handle regularly.
• Ensure the cleansing brush is switched off before cleaning.
• DO NOT attempt to clean any part of this product in a dishwasher.
• DO NOT submerge the brush handpiece or charging stand in water.
• Brush Head: Rinse the brush head and bristles after each use, remove excess cleanser from
the bristles by massaging it with your fingers under running water.
• Handpiece: To clean the handle, wipe with a damp cloth.
• Charging stand: Wipe with a damp cloth and wipe with a dry cloth to remove moisture.
CAUTION: Ensure all parts are dry before connecting the charger into a wall socket.
BATTERY REMOVAL
• The battery must be removed from the cleansing brush before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the battery.
To remove the rechargeable battery:
• Run the cleansing brush until the motor stops.
• Remove brush head.
• Remove the two screws at the base of the handle.
• Using a small screwdriver, pry the top cap off the handle.
• Pry the battery from the internal assembly.
• Dispose of the battery safely.