Weekly:
1. Perform the daily cleaning steps 1 and 2.
2. Remove the cover from the hair pocket assembly. (Diagram L) Place the
body of the shaver aside to ensure that it will not get wet.
3. Release the inner cutter carrier by rotating the locking arms counter-
clockwise. (Diagram M)
4. Remove the inner cutter carrier away from the cutters. (Diagram N)
5. Remove the cutters. (Diagram O)
6. Thoroughly rinse away any debris from inner and outer cutters. (Diagram P)
7. Replace the inner cutters. (Diagram Q)
8. Place the inner cutter carrier back into position and lock into place by
rotating the locking arms clockwise until they snap into place. (Diagram R)
9. Lubricate each cutter with Remington Shaver Saver (SP4).
10. Close the head assembly. (Diagram K)
** Trimmer:
Lubricate teeth with oil every six months
Replace head icon
•
The replace head icon on the LCD display will flash at a 1 second interval
every time the shaver reaches 600 minutes of operation.
•
This symbol means that it is time to replace your shaver head.
•
The replace head icon will flash for 9 minutes and then turn off.
•
If the shaver is turned off and then on the icon will continue to flash until
the total time the icon flashes has reached 9 minutes.
•
If the replace head icon is flashing when the shaver is turned off it will
continue to flash for 15 sec. and then stop.
9
